bosch wfr 2866 – UK Whitegoods

This topic has 7 replies, 2 voices, and was last updated 18 years, 6 months ago by funbobby.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
October 2, 2007 at 10:09 am #31011

funbobby
Participant

hi door jammed and have no power at all, no lights or anything. managed to get door open from manual release but still completly dead,any ideas??

October 2, 2007 at 2:06 pm #229373

Martin
Participant

Re: bosch wfr 2866

Is there power to the machine? Have you checked the fuse?

October 2, 2007 at 2:39 pm #229374

funbobby
Participant

Re: bosch wfr 2866

yes power to machine have checked that.

October 3, 2007 at 12:19 pm #229375

funbobby
Participant

Re: bosch wfr 2866

any ideas anyone?

October 3, 2007 at 12:25 pm #229376

Martin
Participant

Re: bosch wfr 2866

funbobby wrote:any ideas anyone?

Plenty of ideas and it will involve checking each in turn to establish the department of trouble? It will involve testing the motor and the heater in case of an insulation problem? A close inspection of the Electronic Programme Board is advisable as often when the heater or motor fail it can ‘take out’ that circuit board. 🙁 The pump and the door lock worth a close look too. 8)

If you want expert help? Simply click on the link below for a locally recommended engineer. 🙂

October 3, 2007 at 1:58 pm #229377

funbobby
Participant

Re: bosch wfr 2866

thanks martin, just seem strange there is no lights on the display at all dead as a dodo!

October 3, 2007 at 2:09 pm #229378

Martin
Participant

Re: bosch wfr 2866

Unlike the sad demise of the Dodo, maybe your Bosch may just be a Phoenix in disguise? 8)

October 4, 2007 at 7:57 am #229379

funbobby
Participant

Re: bosch wfr 2866

looks like will have to call out bosch then.thanks anyway
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.