W’Pool 4501/5WH

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › W’Pool 4501/5WH

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 3, 2007 at 7:20 pm #31079
    clivejameson
    Participant

    851150415829

    This is baffling me. Original fault just no go, no start light coming on and no cancelling by holding start.

    So naturally i replace what i deem to be a faulty pcb, however the symptoms are now the same. I’ve tried starting a test cycle (selecting prewash and holding start while switching on?) and that just gets a very dull glow on the start light for a second or so 😕 . It appears to operate a cycle when the selector is pointing straight down but this is not even a program position on the facia 😯

    Anyone else had this kind of thing, and if so what was the resolution?

    October 9, 2007 at 9:09 am #229600
    clivejameson
    Participant

    Re: W’Pool 4501/5WH

    anyone?

    October 9, 2007 at 9:16 am #229601
    gegsy
    Participant

    Re: W’Pool 4501/5WH

    Hi Clive
    Have had some where the wires have snapped off the edge connector on module in door 😀

    Greg

    October 9, 2007 at 4:28 pm #229602
    SWERV
    Participant

    Re: W’Pool 4501/5WH

    I’ll find a S/H board for you to try?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.