Hotpoint WMA40P door lock light flashing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMA40P door lock light flashing

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 5, 2007 at 3:56 pm #31129
    robwash
    Participant

    Hi, No supply going to door lock to lock door. checked all usual things I.e. brushes, looms ok. no blockages. is this a control board fault please?

    October 5, 2007 at 4:06 pm #229778
    iadom
    Moderator

    Re: Hotpoint WMA40P door lock light flashing

    If all the wiring is intact then it does point towards the PCB. 😥

    Have had this fault on more than one occasion.

    Jim.

    October 5, 2007 at 6:32 pm #229779
    richardable
    Participant

    Re: Hotpoint WMA40P door lock light flashing

    jims right, had the board fault too, if you change the board change the interlock as well.
    richard

    October 6, 2007 at 11:41 am #229780
    Alanj
    Participant

    Re: Hotpoint WMA40P door lock light flashing

    Hi Robwash,

    you will probably find the board has blown tracking. Replacement board from EMW will fix it. £34.90 + vat.

    Alan

    October 6, 2007 at 12:23 pm #229781
    robwash
    Participant

    Re: Hotpoint WMA40P door lock light flashing

    cheers everyone. all a great help. robwash

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.