- This topic has 4 replies, 2 voices, and was last updated 18 years, 6 months ago by
.
-
Posts
-
can anyone help i have a hotpoint 7782 dishwasher that sticks on programme 3 and solenoid valve energizes ,the valve has just been replaced ,but the fault is still there.checked metering tank for blockages and its clear.the only way it will start to fill again is if the inlet hose is dissconnected ,it fills and runs for 2 or three sequences then locks up again. anybody got any clues.
Re: hotpoint dishwasher fault
Model number is incorrect. Hotpoint dishwashers produced by at least five different manufacturers, correct number is vital to assist you.
Jim.
Re: hotpoint dishwasher fault
sorry jim
model number is df21ar ,also on label is 42624757,and 018/2602/01yeah forbidden planet is great was involved with local amateur dramatics
and played in the pit band for that show. great fun!!!!Re: hotpoint dishwasher fault
DF21 is actually a UK produced machine. There is a black ‘S’ shaped hose that runs from the bottom of the large plastic fill matrix to the sump , this can get gunged up and give the fault you describe.
Having said that, I had two or three of these machines a few years back that had this fault, no matter what I tried I couldn’t get to the bottom of it, they were all on very high mains pressure and at least one of them used to work if she went outside to the garage and turned the cold water tap to the garden hose on. 😕
Best of luck.
Jim.
- You must be logged in to reply to this topic.