ctd00

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ctd00

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • October 17, 2007 at 5:29 pm #31457
    waters
    Participant

    Drier only turns in 1 direction and then stops when it should be reversed.After a few minuites it starts again when the direction changes,is this a timer fault or a relay,

    October 17, 2007 at 7:16 pm #231229
    johnnyj
    Participant

    Re: ctd00

    Sounds like the timer or the wiring from the timer to capacitor jj

    October 17, 2007 at 7:20 pm #231230
    waters
    Participant

    Re: ctd00

    Thanks ,i will try replacing the timer

    October 17, 2007 at 8:25 pm #231231
    trotter
    Participant

    Re: ctd00

    Uhmmm I beg to differ 🙂 Sounds more like a relay to me ❓

    October 17, 2007 at 8:36 pm #231232
    rolf
    Participant

    Re: ctd00

    i would go for relay first

    October 17, 2007 at 9:27 pm #231233
    bobokines
    Participant

    Re: ctd00

    Once the relay has engaged it is basically not involved in the reversing circuitry. I would go for the timer.

    Bob

    October 17, 2007 at 9:56 pm #231234
    helo_75
    Participant

    timer, fitted loads of em

    October 17, 2007 at 10:32 pm #231235
    iadom
    Moderator

    Re: ctd00

    For the benefit of rolf & trotter and the OP, I should point out that forum member johnnyj was until very recently a Hotpoint/ Indesit Company engineer, possibly now franchised and helo-75 is currently a Comet engineer with access to most of the Indesit Company tech info etc. 😉

    Jim.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.