smeg dishwasher Di612c overfilling

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › smeg dishwasher Di612c overfilling

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 18, 2007 at 12:28 pm #31476
    bobokines
    Participant

    Di612c serial 4091506760


    Help… Am I missing something obvious. The appliance is overfilling. Pressure switch appears to test out ok but appliace will not stop filling after pressure switch actuates. Is this a pcb fault or am I missing something

    Any help will be appreciated

    Bob

    October 18, 2007 at 5:59 pm #231284
    Oldtog
    Participant

    Re: smeg dishwasher Di612c overfilling

    Hi Bob, usualy the timer and P switch need to be replaced when this happens. P switch just in case of water ingress, the timer because it may have a dry joint so causing it to fail to turn the coil off. Hope this helps.

    Dave

    October 18, 2007 at 8:22 pm #231285
    bobokines
    Participant

    Re: smeg dishwasher Di612c overfilling

    Thanks Dave. I’m only going to get one hit at this one. It’s one of those instances where the house has been sold with the appliances and the machine has broken down before completion…

    Bob

    October 18, 2007 at 8:25 pm #231286
    eastlmark
    Moderator

    Re: smeg dishwasher Di612c overfilling

    have had it before on these, the pcb ignores the pressure switch signal. Dont think there is a flow meter on that on.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.