bendix dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bendix dishwasher

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • October 18, 2007 at 10:37 pm #31498
    fasetester
    Participant

    hi guys went to repair bendix dishwasher could any one tell me how the left hand side pannel comes off. after removing the top screws and the back ones. how do you get it off at the bottom where it is attached to the plastic moulding that goes in under the door. its the one with the washer pump held on with the bracket at the back under the valve cover. thanks fasetester 🙂

    October 18, 2007 at 10:39 pm #231378
    helo_75
    Participant

    u need to take the kickplate off

    open the door, and theres 2 screws holdin the kickplate on

    then u can undo the final screws to get the panel off

    October 19, 2007 at 12:05 am #231379
    fasetester
    Participant

    Re: bendix dishwasher

    thanks for the reply hello75 the kick plate seems to be moulded to the base of the dishwasher does not seem to be any give in it fasetester 😕

    October 19, 2007 at 6:11 am #231380
    bobokines
    Participant

    Re: bendix dishwasher

    Do you have a model number?

    Bob

    October 19, 2007 at 2:50 pm #231381
    fasetester
    Participant

    Re: bendix dishwasher

    no bob i dont forgot to take the model number down. no flashing lights just on off button on the left hand side with programme on right 4 programs. fasetester 🙂

    January 9, 2008 at 4:45 pm #231382
    fasetester
    Participant

    Re: bendix dishwasher

    thanks for you reply bob the model number is DH 102 type 911N81-2f

    January 9, 2008 at 11:14 pm #231383
    aqualectric
    Participant

    Re: bendix dishwasher

    Pull the door right down and the plinth screws are revealed!! One each side.

    HTH,

    Steve.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.