Diplomat ADP8132

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Diplomat ADP8132

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 23, 2007 at 3:42 pm #31623
    Steven
    Participant

    I dont normally touch these as i get so many problems with smeg (dont know why I must be jingst )Diplomat (Smeg) ADP8132 heater blown trip, thought striaght forward so ordered new heater and fitted it.
    Started program up pumps , fills, washes runs for about 5 minutes then stops. no errors no beeps selected wash light on still on.

    I tried to restart it but some how froze the pcb up, the rinse light 1 st one on and the last one flashing, cannot seem to get it to work.

    Is this likely to be a pcb fault any way.

    Steven

    October 23, 2007 at 4:26 pm #231891
    senseib
    Participant

    Re: Diplomat ADP8132

    1 & 5 anti-flood activated. Reset procedure page four “known errors” above.

    HTH,
    Brian.

    October 23, 2007 at 4:32 pm #231892
    maltheviking
    Participant

    Re: Diplomat ADP8132

    senseib wrote:1 & 5 anti-flood activated. Reset procedure page four “known errors” above.

    HTH,
    Brian.

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=28903

    October 23, 2007 at 5:40 pm #231893
    eastlmark
    Moderator

    Re: Diplomat ADP8132

    soundt like a circ pump cutting out when hot, probably what blew the heater in the first place. Last one of them I had had a heap of glass in the wash impellor.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.