Zanussi TCE7276w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi TCE7276w

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 23, 2007 at 3:51 pm #31624
    Steven
    Participant

    I TELL YOU I HAVE HAD SOME S**T THIS WEEK WHEN YOU GET A BAD START TO THE WEEK YOU MAY AS WELL GIVE UP AND GO HOME.

    Zanussi TCE7276 Condenser 916092667 Not starting.
    Customer said the pushed the start button too hard and broke the plastic membrane so ordered one before calling and fitted it.
    Tried it but the start button didnt work.
    There are 6 buttons:
    Door release,no buzzer, quick dry,low temp, delay start, Start

    None of them work, apart from the no buzzer one which actually starts the machine.

    PCB fault??

    October 23, 2007 at 4:30 pm #231894
    maltheviking
    Participant

    Re: Zanussi TCE7276w

    Hi Steven
    Have you checked the “tactile” buttons on the PCB? have a look at the soldered conections with a magnifying glass there may be a crack in the solder, had this fault before although the last one ended up with a new PCB.
    Mal

    October 24, 2007 at 3:35 pm #231895
    cab
    Participant

    Re: Zanussi TCE7276w

    I have fitted the diffuser and it still didnt work had to order another, couldnt see anything wrong with it but there are old posts on this.

    cab

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.