Diplomat ADP8322

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Diplomat ADP8322

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 24, 2007 at 5:12 pm #31652
    mjhservices
    Participant

    Diplomat ADP832
    Put on any programme and it pumps to start with (normal) then when it fills it only fills for about 5 seconds and then starts bleeping and start lights flashes. Shortly after pumps out and stops.
    Any ideas?
    18 months old, water pressure good, pulled off plug to flow meter and seemed to be ok.

    Regards Mark

    October 24, 2007 at 5:41 pm #231956
    Penguin45
    Participant

    Re: Diplomat ADP8322

    Count the pattern of the flashing of the start light.

    Chris.

    October 24, 2007 at 11:35 pm #231957
    senseib
    Participant

    Re: Diplomat ADP8322

    Either NTC Feeler or Pressure switch, nearly always is 😉


    HTH,
    Brian.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.