zanussi f/f

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi f/f

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 29, 2007 at 3:42 pm #31778
    petalpop
    Participant

    model zx99/5s1
    production 928405933
    all the lights flash and it beeps
    no ice build up
    have fitted ntc
    still same fault
    + customer says if he switches it off at the wall then back on it is alright for a day
    he also thinks the compressor seems to be running a lot

    🙁 please help 🙁

    October 29, 2007 at 4:27 pm #232482
    helo_75
    Participant

    gotta be a pcb fault then, its at the back, next to the compressor

    its usually the ntc, but its had one.. so

    pcb!!

    ne1 else agree?

    October 29, 2007 at 6:56 pm #232483
    cab
    Participant

    Re: zanussi f/f

    have had trouble with the pcb in the roof.

    cab

    October 29, 2007 at 8:51 pm #232484
    petalpop
    Participant

    Re: zanussi f/f

    cheers guys
    looks like another one hits the scrapheap getting on for £200 job for both and connections don`t have them both

    October 29, 2007 at 8:54 pm #232485
    clivejameson
    Participant

    Re: zanussi f/f

    I did see one of these where the customer was cleaning the fr out so the door was open for about half an hour…the lamp went bang and took both pcb’s with it 😯

    That didn’t get repaired either 😕

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.