whirlpool adg 7500 not finishing cycle

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › whirlpool adg 7500 not finishing cycle

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 5, 2007 at 11:26 am #31952
    gemmat
    Participant

    My 3 year old dishwasher has been recently giving me problems. It will not complete any cycle. The rinse light comes on and constantly starts beeping. The start light is flashing twice! It had been working on and off for the past few weeks but now its stopping on every wash. Any advice would be greatly welcomed.

    Thanks

    November 5, 2007 at 11:48 am #233046
    Penguin45
    Participant

    Re: whirlpool adg 7500 not finishing cycle

    Flood protection activated. The tray under the machine is full of water and the float switch has been activated.

    You need to drain the tray and find the leak. This little horror is often the culprit:
    http://www.ukwhitegoods.co.uk/modules.p … ge&pid=159

    Power off if you intend to investigate this problem yourself.

    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.