w/pool dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › w/pool dryer

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 7, 2007 at 12:08 pm #32027
    dopper
    Participant

    awz7303 dryer works fine but water on floor. tipped machine back and there is condensation on the plastic underbody. have cleaned condensor and seal etc, anyone had tis problem?
    paul

    November 7, 2007 at 12:14 pm #233304
    Martin
    Participant

    Re: w/pool dryer

    Have you whipped the drum out and checked the fan housings and the pump chamber?

    November 7, 2007 at 12:17 pm #233305
    dopper
    Participant

    Re: w/pool dryer

    will do

    November 7, 2007 at 12:21 pm #233306
    Martin
    Participant

    Re: w/pool dryer

    dopper wrote:will do

    Play close attention to those fans as they do tend to loosen off the splined shaft. (Usually it makes a bit of a racket though when that happens?) The front fan can easily have broken veins and the entrance from the condenser box to that fan blocks with fluff, as does the pump chamber at the back!

    Go for it! 😉

    November 7, 2007 at 12:48 pm #233307
    dopper
    Participant

    Re: w/pool dryer

    both fans ok no pump on this one and theres no blockages anywhere?

    November 8, 2007 at 6:36 pm #233308
    jackster
    Participant

    Re: w/pool dryer

    Hi mate, might be worth checking the inlet gasket at bottom, they perish and sometimes split. It may just be clogged though.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.