Neff U1420 Main Oven Door

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff U1420 Main Oven Door

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 7, 2007 at 7:01 pm #32037
    cookerfit
    Participant

    Went to fit a new fan motor and main oven door hinges to this double built-in oven (Fd Number 7909, Serial E/U1420N06B/01).

    Unable to split the door to replace hinges. Removed all screws but can’t get any movement and don’t want to shatter the glass. (Stainless and glass outer door).

    Does anyone know if this door is bonded “Inner to Outer” or am I missing something ?

    Thanks

    Cookerfit

    November 7, 2007 at 7:50 pm #233378
    nomadPaul
    Participant

    Some of these doors have a sticky seal between the inner and outer sections . Have you tried a flat blade under the inner door edge , slowly levering it away ?
    By the look of the diagram , there seems to be 6 screws in total holding the sections together.

    November 7, 2007 at 11:41 pm #233379
    cookerfit
    Participant

    Re: Neff U1420 Main Oven Door

    Thanks for that Paul.

    The door just would not come apart at the customers, even prising with screwdrivers.

    Got the door back to the workshop, took the screws out, slightly prised it and it came apart no probs.
    Perhaps warm kitchen at customers improved adhesion of sticky strip.
    & very cold back of van reduced its adhesion.

    All back together now with a touch of high temp silicone to overcome the weather.
    Thanks again
    Cookerfit

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.