creda model tcr2 fault

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › creda model tcr2 fault

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 12, 2007 at 6:40 pm #32130
    kev240
    Participant

    water tank is empty but water empty light staying on thus dryer blows cold air, anyone got any idea what the problem is, any help appreciated. 🙂

    November 12, 2007 at 7:11 pm #233722
    Martin
    Participant

    Re: creda model tcr2 fault

    One Shot Thermostat has gone!

    Part No: 1703200 (available by emailing spares@ukwhitegoods.co.uk) 😉

    November 12, 2007 at 10:16 pm #233723
    helo_75
    Participant

    pump could be duff martin……

    the float switch would switch the heater off…. not the first one ive seen!

    November 12, 2007 at 10:22 pm #233724
    kev240
    Participant

    Re: creda model tcr2 fault

    when I tipped the dryer forward water came pouring out of the condenser and the light went off, the heat came back on, but the water container does still not seem to be filling

    November 13, 2007 at 12:19 am #233725
    Penguin45
    Participant

    Re: creda model tcr2 fault

    What Helo said……… Find the blockage or identify pump problem.

    Power off before demolishing the machine.

    Penguin45.

    November 13, 2007 at 6:48 am #233726
    kiddo66
    Participant

    Re: creda model tcr2 fault

    You will find that the drain into the pump chamber is blocked up with lint.
    Have you been cleaning the condenser regularly??

    November 13, 2007 at 2:01 pm #233727
    kev240
    Participant

    Re: creda model tcr2 fault

    stripped it down got a supply to the pump but pump not turning so its off to the pump shop me thinks

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.