faulty smeg df410sf….please help

This topic has 5 replies, 2 voices, and was last updated 18 years, 5 months ago by bobmk1.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
November 18, 2007 at 6:48 pm #32293

bobmk1
Participant

hi folks

i have had the smeg just over a year and all has been fine. it recently stoped working half way through cycles and is currently displaying three dashes ( – – – )and not doing anything! is there a way of resenting the machine. i have cleaned the filter and inlet water filter but it still will not work.

any help would be great.

many thanks 😉

November 18, 2007 at 8:10 pm #234517

Penguin45
Participant

Re: faulty smeg df410sf….please help

Three bars means that the door is open. Check door latch and switch mechanism for function.

Power off if you split the door.

Penguin45.

November 19, 2007 at 12:45 pm #234518

bobmk1
Participant

Re: faulty smeg df410sf….please help

thanks for the info…much appreciated.

is there a sensor that tells th machine the door is closed, as the mechanism seems to br working?

thanks once again
😀

November 19, 2007 at 8:22 pm #234519

Penguin45
Participant

Re: faulty smeg df410sf….please help

There is a switch operated internally by the door latch mechanism – you’ll have to spilt the door to check.

Be very careful of the sharp edges and power off, of course.

Penguin45.

November 19, 2007 at 8:24 pm #234520

bobmk1
Participant

Re: faulty smeg df410sf….please help

thanks once again….i have already cut my finger clean the bottom of the door 🙁 …so i will be extra carful when taking the door apart 😉

November 19, 2007 at 8:53 pm #234521

bobmk1
Participant

Re: faulty smeg df410sf….please help

all working 😀 😀 😀

the connector had come of the handle 😳

what a great site keep up the great work
8)
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.