Indesit WIL 133

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WIL 133

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 25, 2007 at 11:59 am #32489
    Andystu
    Participant

    HI Guys! I have a customer with an Indesit WIL 133. Appears to be a board fault, but could do with some confirmation before I visit EMW. On plugging the machine in to the power, The start light flashes to accept new programme as normal. After aprox 20 secs, lights 3 and 4 flash(Easy Iron and Extra Rinse) and the machine starts filling and pumping at the same time and wont reset. Advice would be appreciated.
    Andystu!!

    November 25, 2007 at 12:34 pm #235319
    Penguin45
    Participant

    Re: Indesit WIL 133

    I have had a WIL, a WIDL and a WIXL with the same problem over the last couple of weeks – every one a board fault.

    Chris.

    November 25, 2007 at 5:15 pm #235320
    billyblue
    Participant

    Re: Indesit WIL 133

    Definatly needs a new board.

    November 25, 2007 at 9:23 pm #235321
    admin
    Keymaster

    With respect I will say: can be simply NTC???

    November 28, 2007 at 9:59 pm #235322
    Andystu
    Participant

    Re: Indesit WIL 133

    Hi guys! Thanks for your input. Turned out to be a board!! No surprise with good old merloni. EMW sorted it as usual.

    Thanks again.

    P.S. Great concept, this website!!!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.