- This topic has 3 replies, 3 voices, and was last updated 18 years, 4 months ago by
.
-
Posts
-
Hotpoint wd860p sn 54090110 power module
Help! Anyone able to help with the part number for the power module for this machine?
it’s not c00099905 as the terminations are different
I’ve got egg on my face with this one as I caused the fault so I can’t send the customer back to Hotpoint! This job is one of those where you wished you stayed in bed
any help will be really appreciated
thanks Bob 😥 😳
Re: Hotpoint wd860p module
I have e-mailed you some info that may help.
The other module I can see is a C00143068, three different eeproms as well.Jim.
Re: Hotpoint wd860p module
Blimey Bob sorry to hear that. 🙁
Have you made note of the ‘5 digit Commercial Code’ from the ‘Industrial Code’ that Partfinder seems to suggest is the way of identifying the correct module? 😕
Re: Hotpoint wd860p module
Thanks boys. I’m still no nearer to sorting this out. The photos of both C00143068 and C00099905 on the Connect site both show different terminal configurations.
I will go back to the customer tomorrow and see if I can get a bit more info from the machine.
The problem all started with a noisy dryer element. It was vibrating during spin, so I replaced the heater box with the new kit. Sadly I didn’t realise that the kit didn’t include a gasket between the heater box and the drum and subsequently it leaked during spin and soaked the module. 😳
Gosh! I wish I hadn’t got involved.
🙁
Bob
- You must be logged in to reply to this topic.