Indesit IS70c heating fault….

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit IS70c heating fault….

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 9, 2007 at 11:41 pm #32878
    matt_tee
    Participant

    Hi, I have an indesit is70c condenser dryer, everything was working fine two hours ago, but now, there is no heat when turned on, the drum is turning, but not heat. I have checked all the common things like water full, or condenser unit blocked, but all these appear o.k

    I have taken off the back and checked the thermostats and heater, they don’t show any signs of burn out, but i have’nt checked them electrically.

    I have also checked that the float isn’t sticking, this is ok.

    any ideas? do you think that the thermostats are burnt out?

    thanks.

    December 10, 2007 at 12:30 am #236699
    Penguin45
    Participant

    Re: Indesit IS70c heating fault….

    http://www.ukwhitegoods.co.uk/help/fix- … lures.html

    Should be what you need to read……. If you haven’t got a test meter, you can’t be sure, so you may risk throwing your money awat. Hint – Both thermostats are normally closed (ie just about zero resistance when split from the circuit.

    You pprobably need these:
    http://shop.ukwhitegoods.co.uk/Tumble+D … +Ther.html

    Power off if investigating.

    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.