ISE2 Technical Manual

Home › Forums › Manufacturer/WP/Insurer Specific Forums › ISE Trade Support Forum › ISE2 Technical Manual

Viewing 15 posts - 1 through 15 (of 19 total)
1 2
  • Author
    Posts
  • December 17, 2007 at 5:01 pm #33070
    kwatt
    Keymaster

    Hi guys,

    I did the manual today for the ISE2 which should hopefully help you if required. It’s not as complete as perhaps I would like it to be but it does have most of the important stuff in it.

    You can access it from the technical area of the ISE website or use this link to have a gander. It takes a bit as it’s a 4Mb PDF file with all the images in it.

    K.

    December 17, 2007 at 8:17 pm #237320
    iadom
    Moderator

    Re: ISE2 Technical Manual

    Downloaded in a flash. 🙂

    Just printing it out now. I notice an Auto Test programme, I don’t seem to be able to find how to run it. ❓

    Notice in the parts list it has a parasite filter. 😆

    Jim.

    December 17, 2007 at 9:17 pm #237321
    kwatt
    Keymaster

    I did say it was info from factory, I didn’t have time to rewrite it all the way I’d perhaps like. 😉

    I will add the test routine to it ASAP, but I had to start to get the show on the road, after all the machines have been about for almost two months. But it’s better that nadda IMO and I’m trying to get it there as quickly as I can, even if it’s not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} to my satisfaction.

    K.

    December 17, 2007 at 10:00 pm #237322
    iadom
    Moderator

    Re: ISE2 Technical Manual

    It is a very good start, much appreciated, I just wonder which parasite they are hoping to trap in the filter. 😆

    Jim.

    December 17, 2007 at 10:05 pm #237323
    kwatt
    Keymaster

    I know nuffin’ about parasites… well perhaps one.

    K.

    December 17, 2007 at 10:37 pm #237324
    iadom
    Moderator

    Re: ISE2 Technical Manual

    The parasite filter is apparently the mains filter. 😆

    December 18, 2007 at 9:41 am #237325
    Goatboy
    Participant

    Re: ISE2 Technical Manual

    iadom wrote:The parasite filter is apparently the mains filter. 😆

    😆 😆 😆

    December 18, 2007 at 11:49 am #237326
    kwatt
    Keymaster

    Re: ISE2 Technical Manual

    Updated with the test program details as well as a few other bits and bobs. 😉

    I did it so you you could just print off the new pages if required.

    K.

    December 18, 2007 at 3:28 pm #237327
    iadom
    Moderator

    Re: ISE2 Technical Manual

    Thank you. 8)

    December 22, 2007 at 9:35 pm #237328
    bazza500
    Participant

    Re: ISE2 Technical Manual

    Front cover says “Version 1.0 December 2008.
    Bloody hell that was a quick year. 😆

    December 22, 2007 at 9:41 pm #237329
    kwatt
    Keymaster

    😕

    K.

    December 29, 2007 at 6:37 pm #237330
    Penguin45
    Participant

    Re: ISE2 Technical Manual

    Well, I repaired my first Vestel machine today. Tripping cricuit breaker, turned out to be a faulty mains suppressor. Had a matching unit in the van, so fitted that and it powered up but wouldn’t start. Fortunately the neccessary info was in the ISE2 manual and managed to force a re-set and away it went.

    This was a Ballack BAL1000W, btw :rotfl: .

    Chris.

    December 29, 2007 at 7:13 pm #237331
    kwatt
    Keymaster

    😀

    All’s well that ends well.

    K.

    December 29, 2007 at 9:16 pm #237332
    Del
    Moderator

    Re: ISE2 Technical Manual

    BTW did you find any parasites in it Chris ? lol

    Sean

    December 29, 2007 at 9:42 pm #237333
    iadom
    Moderator

    Re: ISE2 Technical Manual

    Penguin45 wrote:

    This was a Ballack BAL1000W, btw :rotfl: .


    Its a good job it wasn’t a Shevchenko £20,000. 😆

    Jim.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 19 total)
1 2
  • You must be logged in to reply to this topic.