- This topic has 6 replies, 4 voices, and was last updated 18 years, 3 months ago by
.
-
Posts
-
Hiyas,
Looking for a wiring diagram for the timer and some help on this one.
Timer was replaced by another engineer and another fitted the motor controller module. Machine will fill but then just sits there.
If the wiring hasn’t been messed up on the timer, any ideas?
All ideas and replies will be gratefully received.Thanks in advance.
BrianRe: Bosch WVF2401GB/01
Blimey DP, Timer and module? 😯
Why-ever for I wonder? 😕
Never ever changed a Timer on one of these heaps of Balay rubbish, but Door Interlocks can play silly b’s as well as numerous motor brush, motor connector blocks and wiring harness down to the motor probs.
Check wiring around the motor carefully and for a wiring chart you’d best give Greg a PM 8)
HTH?
Is this the one where the small motor control PCB is situated at rear lower right in machine ? ( Not working today and can’t be arsed to fire up laptop ) I’ve had a couple of these where a wire breaks right on the motor connector plug and isn’t really apparent until you actually remove the motor plug and closely examine it .
I’d check that first .Re: Bosch WVF2401GB/01
The very same Paul and I’m pleased we both came to the same conclusion here! 😀
Re: Bosch WVF2401GB/01
Thanks for the information Martin and Paul.
To expand a little, if the timer is manually turned it will wash, drain and spin, just the timer won’t step on on it’s own.
I’ve ordered a pressure switch (more or less to give me time) but have a real gut feeling that the wiring on the timer has been screwed up.
I’ll certainly check out the motor plug and the loom down to the motor.Thanks
BrianRe: Bosch WVF2401GB/01
Hi Brian
Yea the dreaded wires on motor :rolls:
Check your email for info anyway 😉Greg
- You must be logged in to reply to this topic.