bissell 7920 pro heat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bissell 7920 pro heat

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 20, 2007 at 9:52 am #33148
    kladave
    Participant

    What great machines these beauties are :rolls:
    can anyone tell me how to get inside,i have taken out six screws that hold the top cover but it seems that the flow indicator is stoping my progress and i am unsure if this screws off or pulls off.

    thanks dave

    December 20, 2007 at 12:58 pm #237606
    spanner51
    Participant

    Re: bissell 7920 pro heat

    After removing the 6 screws, unscrew the clear plastic dome of the flow indicator, and the top cover should lift off. when you put it back together dont forget to make sure the smart valve piston is located properly. I wish you luck

    December 20, 2007 at 3:36 pm #237607
    kladave
    Participant

    Re: bissell 7920 pro heat

    Thanks spanner51,i now have the cover off but i’m still non the wiser 😳 the problem is that the machine will not suck up the dirty water any pointers ???

    thanks dave

    December 20, 2007 at 4:03 pm #237608
    spanner51
    Participant

    Re: bissell 7920 pro heat

    Does the machine not suck? or does it not spray water?

    December 20, 2007 at 4:12 pm #237609
    kladave
    Participant

    Re: bissell 7920 pro heat

    What a pig !!
    i have just found the red filter in the tank well blocked 😳 reassembled machine and now it will not pump 👿

    December 20, 2007 at 4:49 pm #237610
    kladave
    Participant

    Re: bissell 7920 pro heat

    Ok all sorted,i had not ‘hooked ‘ valve pipe into knob,once again thanks very much spanner.

    Dave

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.