- This topic has 4 replies, 2 voices, and was last updated 18 years, 3 months ago by
.
-
Posts
-
I’ve just watched my FJ1295 go through a full cycle to verify it was working after an earlier fix and, although it filled/heated/washed/pumped/etc, I didn’t notice anything different to a normal “non-jetwash” washer.
What’s the jetwash bit supposed to do?
I noticed a hum from the lower front right – could this be a jammed jetwash pump (is there such a thing?)Dave
yep, and its designed to ‘shower’ the clothes with water… most people dont notice it doesnt work, but ive had occassion to find a fault code in diagnostics.. e85 i believe where the pump goes o/c and doesnt allow the machine to start
if you look inside the door, and upwards, you’ll see a spout.. and thats where the waters supposed to come out, and be wary, it doesnt spray the water all the time
Re: How do I tell whether the jetsystem is working on an FJ1
Thanks!
‘Any suggestions about which part of the cycle it’s supposed to be spraying in?
Presumably I lie the machine on its back to get to the pump – is it just a case of replacing it or can it be stripped?Dave
your gonna have to take the rear cabinet off to get to it
and the pump itself is a different base to the normal pump, has a different sized impellor, although u have put an ordinary pump base on and its worked fine
oh… and when its supposed to work? the machine will fill , then tumble 5 or six times, on the level fill, the second one, the pump SHOULD be running then
good luck
- You must be logged in to reply to this topic.