- This topic has 2 replies, 2 voices, and was last updated 18 years, 3 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Model AWZ7303, pulled out the condensor to find the whole of the front fan in bits in the condensor compartment. Part number is 481236118292.
Not had one of these in bits before, how difficult is a front fan change?
Jim.
Re: Whirlpool C/Dryer fan
Would check the fan housing before ordering bits, had one once cut right through it. Not too bad a job, IIRC, drum out, obviously (but that is easy)., seem to remember a bit of difficulty removing the fan cover at the front. Old fan may need to be cut off as its an interference fit on the shaft with some sort of crushable spacer.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.