wma50

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wma50

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 3, 2008 at 5:39 pm #33372
    mikehha
    Participant

    Another one of these wma faults.Changed the board because all it would do was rinse and spin even if you selected a wash now it will wash but wont spin orderd another board from EMW it gives the same fault just tumbles both ways on the spin cycle for about 4mins then shuts down only to leave the door lock and spin lights on. You also cant stop and change prog have changed pressure sw and door lock. HELPPPPP
    me!

    January 4, 2008 at 11:46 am #238446
    burns
    Participant

    Re: wma50

    I friend some time ago changed a wma tub and found the machine was doing something very similar. he begged a board and then came back and asked for another as it was faulty :rolls: We got together and found the two wires to the relay on the board were reversed. uninsulated and non insulated cable ends on the relay.
    Swapped around and presto. Machine still working great and that some years ago now.
    Question has the board been disturbed or the wiring interfered with by anyone else? 💡

    January 4, 2008 at 4:39 pm #238447
    wilf
    Participant

    Re: wma50

    two wires far right the one with the sleeve goes to the right (closest to the side of the machine ) it caught me out once

    wilf

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.