Beko WMA1715S Pre wash light flashes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA1715S Pre wash light flashes

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 8, 2008 at 5:05 pm #33506
    Geoff1312
    Participant

    Hi all,
    Called to above machine: pre wash light flashing, unable to set programme. Ran test programme as per UKW fault code guide. No motor action. Replaced brushes (fortunately new type hoover brushes fit).
    Re ran test again, all functions seem ok. Still unable to run machine and pre wash light still flashes. p.s. door does lock.
    Any help would be appreciated.
    Thanks in anticipation
    Geoff

    January 8, 2008 at 6:17 pm #238949
    Penguin45
    Participant

    Re: Beko WMA1715S Pre wash light flashes

    Washman wrote:Hi

    Flashing pre wash LED or flashing start/cancel button on WMA1715 BEKO

    Turn power off (not at wall )
    Select 90 degree wash
    Press start and cancel button down at same time for 3 seconds and turn power button on whilst still holdingbuttons down– Start light will flash.
    Leave power on
    Select any spin position
    Press start and cancel button at same time again for 3 seconds–other buttons may flash-if they do press start and cancel buttons again for 3 seconds
    machine should be reset ready for use


    Mike

    January 8, 2008 at 6:24 pm #238950
    cab
    Participant

    Re: Beko WMA1715S Pre wash light flashes

    If prewash light is lit I think this means child lock on!

    cab 😕

    January 8, 2008 at 6:51 pm #238951
    Penguin45
    Participant

    Re: Beko WMA1715S Pre wash light flashes

    Good call………

    Washman wrote:HI

    Flashing PRE WASH LED is child lock on, you have to press both second and fourth auxiliary function buttons at the same time for 3 seconds to cancel child lock (see page 10 of user manual )

    MIke

    January 9, 2008 at 4:35 pm #238952
    Geoff1312
    Participant

    Re: Beko WMA1715S Pre wash light flashes

    Thanks Gentlemen,
    Your expert help worked. Flashing pre wash light does mean the child lock is on. Customer obviously unknowingly set it whilst trying to clear fault lights.

    You have saved another Beko machine from the scrap heap.

    Thanks again, what an excellent site this is!
    Geoff 😀 😀 😀

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.