Miele D/w G525

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele D/w G525

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 8, 2008 at 9:59 pm #33521
    Penguin45
    Participant

    Ancient customer with ancient dishwasher………

    Leaking from matrix on r/h side – not the vent rings or hoses, presume it’s cracked with age. So – how does it come out? Don’t think there’s clearance underneath and the top is full of hard foam!

    P/no for matrix would be useful as well.

    Thanks,
    Chris.

    January 9, 2008 at 8:02 am #239005
    clayside
    Participant

    Re: Miele D/w G525

    Hi Chris, Part No is 1300782 £62.66 plus VAT. Is it leaking out of vent at back right hand side if so could be mixer ball stuck. Undo top fixing of mattrix (the smaller one) then turn machine to fill for a few secondsa small ball size of a pea should end up in base filter ball is yellow or red.I sometimes move ball off seat by sticking little finger in hole and moving it.If unit needs replaceing it comes out of base, just room to get it out but mind fingers as steel edges very sharp. Hope this helps Clayside.

    January 9, 2008 at 8:44 pm #239006
    Penguin45
    Participant

    Re: Miele D/w G525

    Thanks, Clayside.

    Chris.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.