OLD Zan intergrated d/w spring cable

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › OLD Zan intergrated d/w spring cable

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 9, 2008 at 12:43 pm #33536
    Goatboy
    Participant

    This Zanussi is probably about 20 years old 😕

    ID1000

    I’ve done the door springs before but now the cables on the springs have broke. I can’t find a part number anywhere 🙁

    Can somebody please put me out of my misery, and tell me that they’re obsolete, or a part number maybe?

    Cheers 🙂

    January 17, 2008 at 9:09 pm #239060
    TELL
    Participant

    Re: OLD Zan intergrated d/w spring cable

    old boy eng on the zanussi range, i think you might have to kick this into touch, this model was on microfichce only, and its not listed on the TDS site. i think these were of a metal wire, wound type, and a loop formed on both ends by the cable being pushed back on itself through a metal coller, then crimped. the only the other way is if you have a sea fishing friend?, he could possibly make up a couple of heavy duty traces, with loops formed at the ends. he will know what to do. depends on how desperate you want to repair the d/w. hope that suggestion helps.
    TELL..

    January 18, 2008 at 9:27 am #239061
    Goatboy
    Participant

    Re: OLD Zan intergrated d/w spring cable

    😆

    He can still use the machine, it just has a violent door opening action!

    In the meantime, he’s saving the pennies for a brand new m/c from me 🙂

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.