Whirlpool ADP9410/1WH dead.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool ADP9410/1WH dead.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 9, 2008 at 11:01 pm #33561
    aqualectric
    Participant

    Whirlpool ADP9410/1WH dishwasher. 854294115110 339723004774.

    Going to this machine Friday, so:-
    The machine is switched on, the pump runs and the green lamp flashes. Doesn’t seem to reset. Does nothing else.
    I am thinking NTC failure. NTC’s seem to be a problem on Whirlpools. But which one?
    Any help appreciated!!

    Thanks,

    Steve.

    January 10, 2008 at 12:44 am #239164
    Penguin45
    Participant

    Re: Whirlpool ADP9410/1WH dead.

    If it will not reset, PCB…………

    Chris.

    January 10, 2008 at 12:48 am #239165
    aqualectric
    Participant

    Re: Whirlpool ADP9410/1WH dead.

    Cheers, Chris!!
    Forewarned is forearmed.

    Thanks,

    Steve.

    January 10, 2008 at 12:51 am #239166
    Penguin45
    Participant

    Re: Whirlpool ADP9410/1WH dead.

    Well, there’s no flood protection, so there’s nothing else.

    Chris.

    January 10, 2008 at 8:29 am #239167
    DentedPorsche
    Participant

    Re: Whirlpool ADP9410/1WH dead.

    Machine is over 10 years old. The continuous flashing light only indicates an error has occured. You have to go into the “passive test program” to show the stored failure code.
    NTC fault, Water leakage and Continuous water inlet (F1, F2 and F9) will prevent the test program being run.


    The procedure to run the test programs and the error codes differ from the later models.
    I’ve got the procedure (clear as mud) and error codes on a pdf if you need them.
    Brian

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.