- This topic has 2 replies, 2 voices, and was last updated 18 years, 2 months ago by
.
-
Posts
-
A child fell on the open door.. so now it won’t close, I took off the front door outer panel and side panels…cant find any obvious damage.
The door hinges are touching the lower front cover (access to drain pump) when closed, if I remove this cover the door will now close, so the hinges are at a lower then normal position, although the door lock still is in line with catch. not sure what parts I need to resolve this fault, as already explained no visual fault..cant anyone help please!!
JohnWhen the door is opened , into the horizantal , does it go past the 90* point . i.e does it actually slope downwards when fully opened –
If it does , then its probably the actual inner door itself thats bent and distorted . Check the two screw heads on the lower side , inner edge of the inner door panel . These screw into the hinges . Do these area’s of the inner door panel look bent ? This is where they normally deform if someone falls/steps onto the open door.
This would be my best guess without actually seeing the door physically
- You must be logged in to reply to this topic.