- This topic has 3 replies, 3 voices, and was last updated 18 years, 2 months ago by
.
-
Posts
-
Hi I have a whirlpool dishwasher model ADP7966 6th sense, when I turn the temperature knob round the first temperature 40-50 green light comes on ,and althou the knob will continue to turn, non of the other green lights will come on. The only other 2 lights that come on are rinse aid @ salt (red), when I push in the starter button it flashes twice stops a bit then starts flashing again then stops again, and it just carry’s on like this. Can anyone please help me. I have had the dishwasher between 2-3 years. cheer’s maz
Re: dishwasher
Two flashes of the start light means it has a leak somewhere and there is water in the base tray…you can confirm this by unplugging and gently tipping the machine back at 45o with towels on the floor…
If you can post the model number and service number we might be able to give more specific information 😉
clivejameson wrote:Two flashes of the start light means it has a leak somewhere and there is water in the base tray…you can confirm this by unplugging and gently tipping the machine back at 45o with towels on the floor…
If you can post the model number and service number we might be able to give more specific information 😉
Whirlpool dishwasher ADP 7966 6th sense
Thank you Clive it is a leak, can you give me any specific information. I found this number on the inside of the door ADP7966/3 WHM and SER 330403008188. Many thanks
Maz JordanRe: dishwasher
Standard leak is this:
http://www.ukwhitegoods.co.uk/modules.p … ge&pid=159The only way to be sure is observation……..
Penguin45.
- You must be logged in to reply to this topic.