indesit

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 18, 2008 at 6:30 pm #33822
    superspin
    Participant

    hi all

    have been out to a indesit WIE167 automatic washer today the error is displaying FE03. looked up code and replaced thirmistor. old part was faulty, but after reseting and re testing, the machine fills for about 20 seconds then flashes FE03 and starts to empty and fill at the same time.

    is this the control board ? have checked element and p switch.

    January 18, 2008 at 7:12 pm #240198
    helo_75
    Participant

    well of course its the pcb

    its NEVER the themistor

    u’ll need an eprom too

    January 18, 2008 at 8:01 pm #240199
    iadom
    Moderator

    Re: indesit

    Strange as it may seem the last four F03 Indesits I have had have been fixed with a new thermistor, the round one that plugs in the back of the drum, not had the same luck with the heater mounted thermistor type though. 😥

    Jim.

    January 19, 2008 at 10:53 pm #240200
    Tony_EMW
    Participant

    Re: indesit

    stock item at £34.90 + vat (inc eprom & postage) Tony 0115 9652118

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.