Bosch SGS09L12GB/14 suppressor failure

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGS09L12GB/14 suppressor failure

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 18, 2008 at 10:09 pm #33825
    Simon46
    Participant

    Dishwasher started to trip Main RCD when off.
    Is there an easy way of getting 608104 Suppressor out? :hmm:

    Regards
    Simon

    January 18, 2008 at 10:43 pm #240206
    Twoten
    Participant

    Re: Bosch SGS09L12GB/14 suppressor failure

    I done one of these today;

    I find if you use a small flat screw driver and gently lift the edge of the ‘cable supply’ plate (furthest edge from where the cable enters) on the rear of the machine the plate slides toward the centre of the machine and comes out of the base assembly.

    There are two small lugs that prevent the plate from sliding about 15mm in from the outer edges. I haven’t tried it but an old credit card might also do the trick!

    Refitting is just a case of sliding back into place.

    January 18, 2008 at 10:50 pm #240207
    Simon46
    Participant

    Re: Bosch SGS09L12GB/14 suppressor failure

    Suppressor is a seperate item the other side it looks to me on this logixx

    S.

    January 18, 2008 at 11:05 pm #240208
    Twoten
    Participant

    Re: Bosch SGS09L12GB/14 suppressor failure

    Sorry about that, the model I looked at was SGS09L02GB/17, i thought it was the same.

    January 19, 2008 at 7:54 am #240209
    Simon46
    Participant

    Re: Bosch SGS09L12GB/14 suppressor failure

    Yes this one slides upwards but the way i see it the base has to be seperated from the cabinet as i cant get my hands in.

    S.

    January 30, 2008 at 8:57 pm #240210
    Simon46
    Participant

    Re: Bosch SGS09L12GB/14 suppressor failure

    Base seperated job done.
    Customers plug in RCD earth pins fallen inside so grabbed hold of front panel whilst running and BZZZ :zap: .

    S.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.