- This topic has 3 replies, 2 voices, and was last updated 18 years, 3 months ago by
.
-
Posts
-
Hi Everyone, The anti flood appears to have kicked in on my dishwasher. Having searched the posts on here already I see that people have emptied the tray in the bottom of the dishwasher.
I want to do the same but want to know how to get to the tray that everyone mentions. I want to try this before arranging for someone to come out and have a look. I think the dishwasher is ok but I just need to reset the anti flood. Any help to locate and drain it would be appreciated.
Cheers
😕 😕 😕Re: Anti Flood on a Dipplomat 8902 – How to drain the tray
Drag it out, cut the power, throw down some towels and lean it back.
Penguin45.
Re: Anti Flood on a Dipplomat 8902 – How to drain the tray
Thanks for that. Sucessfully managed to drain the system. When I selected the rinse cycle just to check, it seemed to work ok for about a minute and then the 1st 2nd and 3rd light illuminated and it drained all the water out again. Have reset the machine I think by switching it off at the power button, switching it back on and then pressing the program button four times quickly which got the 1st and 5th light flashing. Then switched the uhnit off for another 15 seconds or so and then switched it back on.
It’s currently doing a test rinse cycle and appears to be making all the right noises at the moment…..Fingers crossed
Thanks for your help again.
- You must be logged in to reply to this topic.