Problem with Diplomat Softline Gas Oven – ADP0530

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Problem with Diplomat Softline Gas Oven – ADP0530

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 21, 2008 at 11:11 am #33892
    Maggie1979
    Participant

    Hi,

    Over the last few weeks we have been having problems with our Diplomat gas oven and grill.

    When we put the grill on, the buttons get really hot to the point where you can’t touch them and then the grill and clock will switch off for about 5-10 minutes. After that, the clock will come back on and once reset, the grill will work again.

    I called Diplomat, they are charging £75.00 just to come out and look at it, but the person on the phone did say it sounded like a problem with the cooling fan.
    Can anyone confirm this as well as let me know where I can get a new fan from and how easy it would be to install?

    Thanks

    Maggie

    January 21, 2008 at 12:20 pm #240493
    NWAR
    Moderator

    Re: Problem with Diplomat Softline Gas Oven – ADP0530

    Hi Maggie

    It does sound like it may be a cooling fan problem. As well as the cooling fan though there’s also a small circuit board which controls the fan that could be faulty.
    Without having it tested there’s no way of saying which component is faulty and it may be worth seeing if you can get someone local (try repairs@) to examine it rather than start throwing money at parts and hoping it’s the right bit.

    Since it’s a gas cooker you’ll be looking at getting someone CORGI registered. Even though the repair is likely to be to electrical components only, to gain access the machine may have to be disconnected from the gas supply.

    Both parts mentioned above should be available from UKW:

    Cooling fan – 082233400 (roughly £50)
    Cooling fan PCB – 082814400 (roughly £30)

    You can email spares@ukwhitegood.co.uk for more accurate pricing and availability 🙂

    January 21, 2008 at 1:35 pm #240494
    Maggie1979
    Participant

    Re: Problem with Diplomat Softline Gas Oven – ADP0530

    Thanks,

    I will organise for someone to take a look as like you said, I don’t really want to be spending more money than I need to by guessing what the fault might be.

    October 23, 2012 at 3:48 pm #240495
    sparky_69
    Participant

    Re: Problem with Diplomat Softline Gas Oven – ADP0530

    hey ive got the same prob ive tested the fan and the pcb and there both ok but when i power the fan and pcb up its got a voltage drop on the pcb 120v instead of 240v but the pcb is ok have uyou any ideas thannks sparky 🙂

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.