Butler BDW6010

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Butler BDW6010

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 21, 2008 at 1:58 pm #33897
    PiersR
    Participant

    Hi
    I have a Butler BDW6010 integrated dishwasher that has a slight problem. The door catch has suddenly got a lot stiffer when you close the door, and also the washing programme starts when you press the button, not when you close the door. Any idea’s?

    Thanks
    Piers

    January 21, 2008 at 8:41 pm #240515
    Penguin45
    Participant

    Re: Butler BDW6010

    The only Butler I’ve ever seen was a SMEG – your description of the fault suggests that the door latch is jammed in the closed position. Does the machine stop if you open the door when it’s circulating?

    Penguin45.

    January 22, 2008 at 3:07 pm #240516
    PiersR
    Participant

    Re: Butler BDW6010

    Thanks for the response Penguin45. The machine doesn’t stop when you open the door no. You could be right in suggesting it’s a Smeg machine aswell, as the oven, hob and microwave are all Smeg. Is this a simple fix? I assumed it must be something to do with the latch. Whe you say latch, which part of the latch is it? The door side or machine side?

    Thanks
    Piers

    January 22, 2008 at 8:39 pm #240517
    Penguin45
    Participant

    Re: Butler BDW6010

    In the door – it’s a turn-over mechanism. If you look into the slot, there should be two “prongs” looking back at you. If the slot appears to be blocked, the latch may well be in the closed position.

    Power off if you finish up pulling the door apart.

    Penguin45.

    January 24, 2008 at 9:04 pm #240518
    PiersR
    Participant

    Re: Butler BDW6010

    All sorted now Penguin45 😀 It was the catch after all. Thanks very much 😀

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.