smeg WM no fill

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › smeg WM no fill

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 22, 2008 at 11:15 am #33948
    abbots
    Participant

    hi,
    bit stuck on this one.
    WM16AAA
    0413733193

    intermittent fault.some times it will fill and some times it wont.
    all obvious things checked.
    solenoids OK
    pressure system ok etc.
    i suspect one of the PCB’s , maybe the front one but i’m not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}.
    any one come across this fault before.
    thanks.
    john

    January 22, 2008 at 7:48 pm #240667
    robbo1973
    Participant

    Re: smeg WM no fill

    i had a one before xmas smeg but w/pool dead then it fired up and filled then dead checked carbons pressure system etc it turned out to be front board at the bottom.

    good luck chris.

    January 22, 2008 at 8:01 pm #240668
    abbots
    Participant

    Re: smeg WM no fill

    cheers chris,
    any one had this one?
    john

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.