creda tcs3 tumble dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › creda tcs3 tumble dryer

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 22, 2008 at 10:08 pm #33979
    tedd
    Participant

    hi,could anyone tell me how water enters the rear cover where the heater is on this model and how to solve it regards tedd

    January 23, 2008 at 12:19 am #240770
    Penguin45
    Participant

    Re: creda tcs3 tumble dryer

    Channel into pump chamber blocked, pump blocked/failed. Water backs up and leaks into fan chamber, water into heater, bang.

    Drum out, demolish and clean.

    Chris.

    January 24, 2008 at 4:58 pm #240771
    tedd
    Participant

    Re: creda tcs3 tumble dryer

    thanks for reply found i didnt have to take drum out like on older models

    January 24, 2008 at 5:58 pm #240772
    iadom
    Moderator

    Re: creda tcs3 tumble dryer

    If you lie down on the floor, or lie the machine on its back if you’re not as sprightly as us young un’s. 😉 you can reach into the rear of the condensor chamber and clean the channels with your fingers, then from the rear poke a large bag tie through the hole the water flows through into the float chamber to complete the job, never fails.

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.