Bosch fridge/freezer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch fridge/freezer

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 31, 2008 at 8:42 pm #34225
    JOHN CLARKE
    Participant

    I have a problem with a Bosch KGV3120GB fridge freezer, the temperature in both compartments is not low enough. I have changed the module and the light switch without any improvement. I can’t find where the thermistor senses, can’t even see where it fits to the module. Is there some magical way this keeps temperature or am I blind to something.

    January 31, 2008 at 10:33 pm #241736
    gegsy
    Participant

    Re: Bosch fridge/freezer

    Have you considered a system problem 😕

    Greg

    January 31, 2008 at 11:14 pm #241737
    Simon46
    Participant

    Re: Bosch fridge/freezer

    This is a short the sensor out mod isnt it?
    http://www.ukwhitegoods.co.uk/modules.p … ht=kgv3104

    S.

    January 31, 2008 at 11:18 pm #241738
    gegsy
    Participant

    Re: Bosch fridge/freezer

    Yea it is but usually it dies completely not low temp 😕

    Greg

    February 1, 2008 at 5:51 pm #241739
    JOHN CLARKE
    Participant

    Re: Bosch fridge/freezer

    Thanks Simon46,
    I have copied the mod instructions and will rebook the call, sounds a simple mod hope it solves the problem, will post the result.
    Thanks again,
    John.

    February 1, 2008 at 7:19 pm #241740
    superfix
    Participant

    Re: Bosch fridge/freezer

    Don’t think the ntc is the problem on this one I’m affraid.

    The symptoms for that fault are that it reaches temp and the ntc cuts the motor off then it won’t restart unless the appliance is turned off then on again.

    I agree with Greg it sounds like a system fault.

    February 2, 2008 at 1:10 am #241741
    Simon46
    Participant

    Re: Bosch fridge/freezer

    Yes but cust may have checked it when stuck in defrost?
    John can you let us know the outcome?

    S.

    February 4, 2008 at 3:21 pm #241742
    JOHN CLARKE
    Participant

    Re: Bosch fridge/freezer

    Hi.
    Well I went to do the MOD today, my top wire was light blue not dark blue, but I carried on and did it, working on the position of the wires instead of colour. It went well the machine ran on “switch on” the back wall of the fridge iced up, so I left with my fingers crossed. thanks for your help.
    John.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.