Bosch WFL Codes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WFL Codes

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 31, 2008 at 11:17 pm #34236
    bubs
    Participant

    Hi, use the book all the time thanks.

    Have a WFL with “end” “active” and “ready” lights.
    The book quotes “spin” “rinse” and “wash” lights, can you still use the codes in the book in the same order?

    Thanks for any help
    Graeme

    January 31, 2008 at 11:19 pm #241781
    bubs
    Participant

    Re: Bosch WFL Codes

    sorry this was aimed at the sticky fault codes thread
    Graeme

    January 31, 2008 at 11:20 pm #241782
    iadom
    Moderator

    Re: Bosch WFL Codes

    Moved to Trade Tech for you. 😉

    I’m glad you don’t take penalties for United with an aim like that. 😆

    Jim.

    January 31, 2008 at 11:26 pm #241783
    gegsy
    Participant

    Re: Bosch WFL Codes

    Best have the full model of machine to be sure 😉

    Greg

    FYI – Ready, Active and Finish usually indicates an NTC problem of sorts 😉

    January 31, 2008 at 11:33 pm #241784
    bubs
    Participant

    Re: Bosch WFL Codes

    WFL2860, its the middle “active” light that flashes.
    Customer can press start and the prog will carry on.

    I wondered if there is a mistake in the “spin, rinse, wash” light order in the fault code guide.

    Thanks again,
    Graeme

    January 31, 2008 at 11:38 pm #241785
    gegsy
    Participant

    Re: Bosch WFL Codes

    Oh I see, in that case it basically timing out in the fill for whatever reason and by pressing the Start button again you are giving it a restart of the fill until it finally attains level required 😉

    Greg

    January 31, 2008 at 11:46 pm #241786
    bubs
    Participant

    Re: Bosch WFL Codes

    Thanks Greg,
    OK This matches fault 2 in the book: Now know i can use for this model.
    Graeme

    January 31, 2008 at 11:46 pm #241787
    gegsy
    Participant

    Re: Bosch WFL Codes

    :tup:

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.