Whirlpool Generation 2000+ hood questions

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Whirlpool Generation 2000+ hood questions

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • February 2, 2008 at 3:06 pm #34273
    bins
    Participant

    Model number is G2P CHV/WH

    Also a SERVICE sticker with

    8579 624 15000
    99 0114 040178


    Hi I have one of these – not sure how old – we inherited it when we bought the house a year ago. It recently started to make a loud banging noise (like the fan was knocking against something).

    I’ve taken the cover off, followed by the carbon filter, and finally the fan unit. It seems that the fan itself is a tiny bit wobbly. When I replace the fan and run it it seems fine, but when I put the filter back, or near to it, or just cover the fan unit with my hands the knocking starts again. So do you think I need a new fan, or is it my filter too blocked ?

    Thanks
    Rob

    February 2, 2008 at 4:40 pm #241932
    johnmac11
    Participant

    Re: Whirlpool Generation 2000+ hood questions

    Check the circular black plastic moulding that the motor is fixed on to, if it is damaged it will cause the fault you describe.


    John

    February 3, 2008 at 11:54 am #241933
    bins
    Participant

    Re: Whirlpool Generation 2000+ hood questions

    johnmac11 wrote:Check the circular black plastic moulding that the motor is fixed on to, if it is damaged it will cause the fault you describe.


    John

    Hi John – I’ve just had another look and couldn’t find any damage to the housing, but on closer examination of the fan (after I realised I could take it off ) I can see that the ring of plastic that connects the vanes to the disk is broken, and that there is black scuffing on it (I’d seen this yesterday actually). It’s obviously being forced outwards by the spin. So I think I just need a new fan.

    Thanks for your help,
    Rob

    February 3, 2008 at 12:44 pm #241934
    Penguin45
    Participant

    Re: Whirlpool Generation 2000+ hood questions

    Fan and motor assembly, I think you’ll find – p/no 4812 310 39025. An email to spares@ukwhitegoods.co.uk for prices and ordering.

    Penguin45.

    February 3, 2008 at 2:45 pm #241935
    bins
    Participant

    Re: Whirlpool Generation 2000+ hood questions

    Penguin45 wrote:Fan and motor assembly, I think you’ll find – p/no 4812 310 39025. An email to spares@ukwhitegoods.co.uk for prices and ordering.

    Penguin45.

    Yikes – the motor seems fine though; it’s just the fan I need – surely they come separately? I’ll email spares anyhoo

    thanks
    Rob

    February 3, 2008 at 3:04 pm #241936
    Penguin45
    Participant

    Re: Whirlpool Generation 2000+ hood questions

    Motor and fan were listed as separate p/nos; however, both supercede to one new number……… They’ve gotcha I’m afraid.

    Penguin45.

    February 3, 2008 at 5:11 pm #241937
    bins
    Participant

    Re: Whirlpool Generation 2000+ hood questions

    Is this what I need ?
    http://www.espares.co.uk/part/cooker-ho … 7962415000)/p/1091/278/0/710945/698074/fan-wheel.html

    February 3, 2008 at 6:26 pm #241938
    Penguin45
    Participant

    Re: Whirlpool Generation 2000+ hood questions

    It is – it would be interested to see what would happens if you try to order it. The actual part number was 4819 515 28292 – contact spares@ukwhitegoods.co.uk – if it is still available, Dave’ll be able to find it for you.

    Penguin45.

    February 3, 2008 at 7:40 pm #241939
    johnmac11
    Participant

    Re: Whirlpool Generation 2000+ hood questions

    Penguin45 wrote:if it is still available

    Just checked and it has not been available for some time. I notice that it says 3-5 days for availability which probably means that it is not a stock item and if so you will probably get an email telling you it is not available when ordered.

    John

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.