Washing Machine Depth Issue

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Washing Machine Depth Issue

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 4, 2008 at 1:11 pm #34317
    Agent Balti
    Participant

    Hi,

    An un-initiated requires some help with the depth of washing machines. I’m not sure where I’m measuring ‘to’ exactly.

    The flat which I’m moving into has what looks to be a viable space, I’m measuring TO the outlet pipe which is horizontally coming out. Now, am I measuring to the end of the outlet or to the pipe itself?

    If it’s to the end of the out, I’m 20mm short. If it’s too the pipe, then I think I’ll be just fine with a standard machine. Am I a little bit dense or just naive?!

    I’m sure you can put me straight…

    Kind Regards,

    AB.

    February 4, 2008 at 1:20 pm #242149
    don
    Moderator

    Re: Washing Machine Depth Issue

    Hi

    Washing machines in the main are 600 mm deep, however Beko produce some at 540 deep but these are only capable of taking a 5kg load. Hotpoint also produce some at 580 deep and Bosch produce a 400 deep machine for the narrowest of spaces.

    If it were me I would have a plumber in to ascertain if the current arrangement can be improved to accomodate a 600 deep machine.

    HTH

    Don

    February 4, 2008 at 1:35 pm #242150
    Agent Balti
    Participant

    Re: Washing Machine Depth Issue

    Cheers Don! Thanks very much.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.