- This topic has 1 reply, 2 voices, and was last updated 18 years, 2 months ago by
.
-
Posts
-
A month or so ago I spent a load of time & effort fixing this MC as it had a “stops after a short while” problem which turned out to be the door interlock and at the same time successfully cleaned out the IWMS – after this the machine worked fine – however it has just “died” without warning.
It has power to the back of the MC from the mains but the light on the main on/off switch does not go on/off when the switch is switched. None of the other lights on the front light up. The switch makes and breaks ok (tested with a meter)
When I check the input at the main on/off switch my meter tells me it has around 60 VAC which confuses me as I would have expected 240 VAC.
Searching the forum suggests the transformer on the control board but from what others say when this fails the door switch light still works – so not sure.
any help appreciated
Cheers
julian
- You must be logged in to reply to this topic.