Dear Mr. Qualtex…..

Home › Forums › General Trade Forum › Dear Mr. Qualtex…..

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 11, 2008 at 4:38 pm #34516
    Martin
    Participant

    As you are sponsoring this forum I’m sure you take note of the general ‘goings on’ this forum generates? 😉

    Can I ask then that you look into improving your spare parts packaging? Specifically the white bags that enclose such things as motor brushes, door handle kits, interlocks etc?

    The problem being that (using carbon/motor brushes as an example) one cannot clearly see through this white plastic film? To the extent that only by opening the sealed package can you confirm whether or not it is the part you want? :rolls:

    There was a time when these sealed bags were clear on one side and opaque on the other, allowing easy identification WITHOUT opening the bag! 👿

    The problem I have matching a motor brush with the 40 or so variants I carry on the van? Having to hold the bag towards the sunlight to try to see through the opaque plastic film….does my head in!!!! 😯

    In fact I’ve so many opened and loose brushes in my stock bin on the van that it is getting well out of order. 😕

    Please Mr Qualtex can you fix it for me? 😛

    February 11, 2008 at 4:49 pm #242973
    kladave
    Participant

    Re: Dear Mr. Qualtex…..

    Martin
    Qualtex do produce the carbon brush booklet that is very detailed,all drawings are actual size with photographs.
    just looked inside mine for part number but can’t seeit listed.
    http://www.qualtexuk.com/page_carbon.htm

    February 11, 2008 at 4:51 pm #242974
    kladave
    Participant

    Re: Dear Mr. Qualtex…..

    just spotted part number on website cat 03 😉

    February 11, 2008 at 6:26 pm #242975
    clayside
    Participant

    Re: Dear Mr. Qualtex…..

    No stock, had on order for 2 months.
    clayside

    February 12, 2008 at 8:09 am #242976
    Martin
    Participant

    Re: Dear Mr. Qualtex…..

    Yep, no stock…. 😥

    I still need to clearly see what Door Handle Kits, TOC’s, and Interlock look like without opening the darn bags. :rolls:

    February 12, 2008 at 9:58 am #242977
    Tom
    Participant

    Re: Dear Mr. Qualtex…..

    I would agree with Martin on this idea.

    Tom

    February 25, 2008 at 12:56 pm #242978
    Martin
    Participant

    Re: Dear Mr. Qualtex…..

    Yippeee! I’ve now got a copy of the ‘Carbon Brush Catalogue’ (CAT03) which does indeed make life easier in identifying carbons. 8)

    Thank you Mr Qualtex 😀

    February 25, 2008 at 3:32 pm #242979
    clayside
    Participant

    Re: Dear Mr. Qualtex…..

    Still waiting for mine. Come on Mr. Qualtex.
    Clayside.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.