- This topic has 6 replies, 3 voices, and was last updated 18 years, 2 months ago by
.
-
Posts
-
Hi, my dishwasher isn’t working and has an error message of 2nd and 4th(daily wash and eco) lights flashing. This code is not in the manual. Can you help?
thanks in advance
SimonRe: hotpoint BFI620 ERROR MESSAGE
Heater fault, very common on these Indesit machines.
Most common causes are the heater or the control PCB.
Checking the heater for continuity/resistance would be the first step.
Be sure to remove the mains plug if you intend to proceed further yourself.
jim.
Re: hotpoint BFI620 ERROR MESSAGE
thank you very much. I have booked a hotpoint engineer but they can’t come ruond for 2 weeks. Do you think it is a problem that could easily be fixed by a local engineer? – are the relevant parts easy to get?
thanks again.
Simonp.s. wish i lived in Rochdale!
Re: hotpoint BFI620 ERROR MESSAGE
There is a very strong possibility that a local independent could fix this for less than the Indesit Company Ltd’s labour charge, neither part is that expensive. Have you tried the link below to see if we have someone in your area?
Jim.
Re: hotpoint BFI620 ERROR MESSAGE
Hi
The most probable fault is the thermal cut out in the base of the appliance.
Bryan
Re: hotpoint BFI620 ERROR MESSAGE
TOC’s are part of the element assy on these Bryan, module failure is every bit as common a no heat cause as element.
In any event, a local chap would almost certainly be less expensive than manufacturers service.
Jim.
- You must be logged in to reply to this topic.