Servis M600 3S. Totally dead.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Servis M600 3S. Totally dead.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 19, 2008 at 8:37 pm #34704
    Madmac
    Participant

    This heap is only about 3 yrs old, already fitted pump, mains filter & belt to it in last couple of years. Latest crisis has me scratching my noggin. No lights at facia , interlock not closing. Tried mainswitch, interlock, PCB from EMW, no joy. Wondering if the small switch panel at front is faulty,any ideas chaps..?

    February 19, 2008 at 9:09 pm #243671
    bazza500
    Participant

    Re: Servis M600 3S. Totally dead.

    Madmac I`m not sure if this fault affected your model but there was a problem with boards where resistor R1 was not of a high enough wattage and went open circuit regularly. Worth a check. I`ve fitted new boards and its gone on the first wash.

    February 20, 2008 at 5:27 pm #243672
    robbo1973
    Participant

    Re: Servis M600 3S. Totally dead.

    the little front pcb also fails and sounds like your symptons.i think emw also repair these.

    cheers chris.

    February 20, 2008 at 7:56 pm #243673
    Madmac
    Participant

    Re: Servis M600 3S. Totally dead.

    Thanks for replies gents, gut feeling is that facia pcb. Will see if cust wishes to continue the fun & games ! Eddie.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.