Hotpoint WD440 washer dryer flashing lights

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint WD440 washer dryer flashing lights

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • February 26, 2008 at 9:57 pm #34890
    goooba769
    Participant

    Right then my WD440 on/off switch has just started flashing fast and the Dry high heat, reduce crease and Time saver lights have started to flash slower.
    I’v seen someone mention the above, apart from having the time saver light come on and they found it to be the control board Part no.C00143056. Has anyone had my symptons or can help?

    February 26, 2008 at 11:11 pm #244349
    iadom
    Moderator

    Re: Hotpoint WD440 washer dryer flashing lights

    Give us the left hand lights by number from top down and we can be more specific.

    If the machine is under 5 years old you would be well advised to allow the Indesit Company to repair this machine under your five year parts guarantee. You will not be able to buy a module & eeprom for less than their £90.00 labour charge.

    Jim.

    February 27, 2008 at 7:49 pm #244350
    goooba769
    Participant

    Re: Hotpoint WD440 washer dryer flashing lights

    Iadom the top two on the left side are flashing and the 4th one down as well. Any ideas?
    Its a secondhand one I’m not sure how old it is and whether its still under warrenty

    February 27, 2008 at 10:28 pm #244351
    iadom
    Moderator

    Re: Hotpoint WD440 washer dryer flashing lights

    Fault is F13, an NTC or fan motor fault on the dryer side. The fault may just be a loose wire on top of the dryer heater box assy, or other dryer side component failure.

    Jim.

    February 28, 2008 at 2:58 am #244352
    goooba769
    Participant

    Re: Hotpoint WD440 washer dryer flashing lights

    What is an NTC and where is it?
    Can I test it?
    Could it be a thermistat?

    February 28, 2008 at 8:06 am #244353
    helo_75
    Participant

    the dryer ntc is mounted on the heater box at the top

    the ntc does the same thing as a thermostat, but is more precise


    easy to change, but as jim says, could just be a broken wire

    plug out if your going to take the top off to check………..

    February 28, 2008 at 2:14 pm #244354
    goooba769
    Participant

    Re: Hotpoint WD440 washer dryer flashing lights

    Can some one give me a link to where I could get one of these NTC’s thanks

    February 28, 2008 at 7:25 pm #244355
    helo_75
    Participant

    look no further …..

    http://shop.ukwhitegoods.co.uk/product_ … ts_id=1992

    good price too

    February 29, 2008 at 10:03 am #244356
    goooba769
    Participant

    Re: Hotpoint WD440 washer dryer flashing lights

    thanks will have a go.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.