whirlpool AWG349/3 programmer advancing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool AWG349/3 programmer advancing

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 27, 2008 at 10:07 pm #34914
    monkey
    Participant

    Hi Guys
    Any clues to fault could be .The timer advances all the time has soon as you turn the machine on and wont stop advancing,

    February 28, 2008 at 6:27 pm #244437
    Alanj
    Participant

    Re: whirlpool AWG349/3 programmer advancing

    You could try the pump or brushes.

    Alan

    February 28, 2008 at 8:45 pm #244438
    monkey
    Participant

    Re: whirlpool AWG349/3 programmer advancing

    thanks
    It is a built-in appliance so I was after a few tips before pulling it out.

    March 1, 2008 at 1:07 pm #244439
    leavemetogetonwithit
    Participant

    Re: whirlpool AWG349/3 programmer advancing

    When I tapped that model into connect it came up with tumble dryer parts 😕
    If it’s a washer tho’ it’s worth checking timer for blown tracks possibly caused by water in interlock (flows fom soap drawer along front).
    Mike

    March 1, 2008 at 1:11 pm #244440
    Penguin45
    Participant

    Re: whirlpool AWG349/3 programmer advancing

    It’s a SMEG-built washer-dryer, Mike, so God himself may not know what’s wrong with it!

    Eliminate everything component by component is probably the only way……..

    Chris,

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.