Whirlpool AWZ 7813 Condensor dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWZ 7813 Condensor dryer

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 4, 2008 at 3:57 pm #35038
    Galway
    Participant

    hi all,called out to this dryer today and this machine is completley dead .there is power coming through the door switch and to the pcb but no lights ,nothing.is this a pcb fault or am i missing something.customer says she only used machine 3/4 times as it is a holiday home and only bought a year ago.thanks

    March 4, 2008 at 4:01 pm #244915
    Martin
    Participant

    Re: Whirlpool AWZ 7813 Condensor dryer

    Very likely the main board is the culprit. 😥

    Hopefully it’s still under guarantee otherwise the cost of fitting a new board is BER.

    March 4, 2008 at 5:00 pm #244916
    SparkyP
    Participant

    Re: Whirlpool AWZ 7813 Condensor dryer

    Hi Galway

    Sounds like the board but check the front felt gasket and lower fan seal if you order a board. Chances are this has let steam out into the board….The bottom fan seal snaps and lets steam into the cabinet which inturn pulls the felt gasket off then damages the board….hth….

    Sparkyp

    March 4, 2008 at 9:32 pm #244917
    Galway
    Participant

    Re: Whirlpool AWZ 7813 Condensor dryer

    thanks lads
    hopefully customer will go for new board but doubt it

    March 6, 2008 at 8:35 pm #244918
    Johnnyboy
    Participant

    Re: Whirlpool AWZ 7813 Condensor dryer

    had similar and found broken wire at pump at rear.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.