Hotpoint WF640 drum support.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Hotpoint WF640 drum support.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 5, 2008 at 11:43 pm #35083
    aqualectric
    Participant

    Hotpoint WF640 washer.

    I need the part number for the 30mm drum support spider for the above machine. Connections is convinced that WF640 is fitted with a 35mm drum!! Arrrrggh!!! 👿

    These 30mm bearings seem to be the standard now – they are nowhere near as reliable as the 35mm with the Rubena seal. Anyone else finding this to be true?

    Thanks,

    Steve.

    March 6, 2008 at 12:21 am #245070
    Penguin45
    Participant

    Re: Hotpoint WF640 drum support.

    Er, 35mm shaft and rear half seems to the only solution…….

    Chris.

    March 6, 2008 at 9:23 am #245071
    aqualectric
    Participant

    Re: Hotpoint WF640 drum support.

    Add to that a 35mm pulley…. 😈

    Thanks for your help Chris; I feared that this was the probable outcome.

    Steve.

    March 6, 2008 at 11:01 am #245072
    iadom
    Moderator

    Re: Hotpoint WF640 drum support.

    Not had to change any pulleys, I’m sure they will fit both.

    Jim.

    March 6, 2008 at 10:17 pm #245073
    aqualectric
    Participant

    Re: Hotpoint WF640 drum support.

    You are right, Jim – thanks for that. Drum half coming tomorrow so all systems go!!

    Cheers,

    Steve.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.